Table 5. Operator Controls – Joystick Features (See Figure 10) (Continued)
Item
No.
Item Function
1 Tilt Function
A. Backward
B. Forward
NOTE: To
operate the joystick, the operator must be on the seat.
Move the joystick lever to the left to tilt the mast backward.
Move the joystick lever to the right to tilt the mast forward.
NOTE: If lift trucks are equipped with clamp attachment option, Return to Set Tilt
(RTST) is not available.
These trucks can be equipped with the Return to Set Tilt (RTST) option. The RTST
option automatically stops the tilt function at a set point. To override the RTST option,
press the override button located directly in front of the joystick and push the joystick
left or right.
RTST is intended as an operator aid in positioning forks or attachments for their appli-
cation to minimize product damage and facilitate load handling.
Care should be taken to operate the lift truck in accordance with load handling instruc-
tions as described in Operating Techniques in the Operating Procedures section of
this Operating Manual.
Model Description
58
To Next Page
Loading...
Need help?
General
