Table 5. Operator Controls – Joystick Features (See Figure 10) (Continued)
Item
No.
Item Function
2, 4 Auxiliary
Hydraulic
Function
(Left Rocker
Switch)
This rocker switch will control either Function 3 or Functions 3 and 4, depending on
the attachment.
NOTE: To operate the joystick, the operator must be on
the seat.
NOTE: If the lift truck is equipped with only a three function valve and clamp attach-
ment, the left rocker switch controls the clamp functions.
Trucks with clamp attachments: To engage the clamp, move the left rocker switch
forward to clamp. To disengage the clamp, push and release the override button loca-
ted directly in front of the joystick and pull the left rocker switch to the rear.
Trucks without clamp attachment: The left rocker switch is operated by moving it
forward and back. The rocker switch is spring loaded to return to the neutral position
when released.
Model Description
59
To Next Page
Loading...
Need help?
General
