28 Chapter 4—Getting Around the User Interface
01V—Owner’s Manual
About the User Interface
Thanks to a user-friendly interface, 01V operation is both logical and intuitive. The 320
x 80 dot LCD display provides clear indication of mix settings and operating status,
while dedicated SELECTED CHANNEL controls allow for quick EQ and pan adjust-
ments. Operation of the multifunction faders depends on the selected Fader mode.
Mixing functions and configuration settings are organized into display pages, with up
to five related pages being grouped together. For example, the MIDI Setup and Program
Change pages are grouped together under MIDI. Parameter selection and editing is car-
ried out using the [CURSOR], [ENTER], [–1/DEC] and [+1/INC] buttons, and
PARAMETER wheel, which is detented for precise and accurate editing.
Display
The 320 x 80 dot LCD display provides clear indication of mix settings and operating
status. As well as showing parameter values numerically, faders and rotary controls are
represented graphically, so you can actually see pan and fader positions. The display
also shows EQ curves and signal level meters. The various sections of the display are
explained below.
Function—This area of the display shows the name of the function
selected using the Function and Fader mode buttons. Functions are
divided into pages, which are identified by numbered tabs, as shown
here. In this example, page 1 of the VIEW function is selected. The fol-
lowing functions can be selected.
Function Buttons Fader Mode Buttons
UTILITY EFFECT 1
MIDI EFFECT 2
SETUP OPTION I/O
VIEW REMOTE
DYNAMICS AUX 1
EQ/ATT AUX 2
ø/DELAY AUX 3
PAN/ROUTING AUX 4
MEMORY HOME
Function
Selected channel
Memory
Effects
Returns
Page area
To Next Page
Loading...
Need help?
General
