219
Using the Help function
LS9-16/32 Owner’s Manual
20
Other functions
1
Using a commercially available text editor
or the “Notepad” included with the
Microsoft Windows series, create a text file
(extension .txt) and save it on your USB
memory.
By default, the character code set of the text file will
be detected as UTF-8. However by adding a line con-
sisting of [ISO-8859-1] or [Shift_JIS] at the beginning
of the file, you can force recognition of the file using
that character code set. You can specify the desired
character code set when using your text editor to save
the text file. The Help function is able to display the
following text files (character code sets / languages).
•Text files written in the ISO-8859-1 character code
set (English, German, French, Spanish, etc.)
•Text files written in the Shift_JIS character code set
(Japanese)
•Text files of the above languages written in the
UTF-8 character code set.
2
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
3
Move the cursor to the SAVE/LOAD button
and press the [ENTER] key.
The SAVE/LOAD popup window will appear.
4
Move the cursor to the file list, and use the
dial on the panel to select the text file you
want to load.
5
Move the cursor to the LOAD button and
press the [ENTER] key, and a confirmation
dialog box will appear.
6
Move the cursor to the OK button and press
the [ENTER] key to begin loading the file.
1
Before you proceed, load the Help file from
your USB memory.
2
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
3
Move the cursor to the USER DEFINED
KEYS popup button, and press the [ENTER]
key.
The USER DEFINED KEYS popup window will
appear.
4
Move the cursor to the button for the user-
defined key whose function you want to
assign, and press the [ENTER] key.
Loading a text file from a USB mem-
ory
Assigning the Help function to a
user-defined key
USER DEFINED KEYS popup button
To Next Page
Loading...
Need help?
General