38
LS9-16/32 Owner’s Manual
Using the tool buttons
● Erasing data from a library
1
Access a popup window or screen that con-
tains tool buttons.
2
Move the cursor to the LIB button in the
toolbar and press the [ENTER] key to
access the popup window of the corre-
sponding library.
1 CLEAR button
Clears (erases) the data that is selected in the list.
3
Move the cursor to the list, and use the dial
or the [DEC]/[INC] keys to select the library
item number that you want to clear.
4
Move the cursor to the CLEAR button and
press the [ENTER] key.
A dialog box will ask you to confirm the Clear opera-
tion.
5
To execute the Clear operation, move the
cursor to the OK button and press the
[ENTER] key.
The data you selected in step 3 will be cleared. If you
decide to cancel the Clear operation, move the cursor
to the CANCEL button instead of the OK button, and
press the [ENTER] key.
Here’s how you can return the EQ/dynamics settings of
the currently selected channel or the effect settings of a
rack to their initial state.
1
Access a popup window or screen that con-
tains tool buttons.
2
Select the channel (EQ/dynamics) or rack
(effect) whose settings you want to initial-
ize.
3
Move the cursor to the DEF button and
press the [ENTER] key.
A dialog box will ask you to confirm the Initialize
operation.
4
To execute the Initialize operation, move the
cursor to the OK button and press the
[ENTER] key.
The EQ/dynamics settings of the channel you selected
in step 2 or the effect settings of the rack will be ini-
tialized. If you decide to cancel the Initialize opera-
tion, move the cursor to the CANCEL button instead
of the OK button, and press the [ENTER] key.
1
•You can’t clear read-only data (data indicated by an “R” sym-
bol).
NOTE
Initializing settings
• GEQ settings can be initialized using the FLAT button in the
screen.
HINT
To Next Page
Loading...
Need help?
General