E-18
DIVIDE
This function lets you divide one track into two separate
tracks by adding a new track number to a specified point
in the track.
Example: Dividing track 3
1 Play the track you want to divide.
2 Use ! or ⁄ to locate the point where you
want to divide the track, then press * to pause
at that position.
3 Press EDIT repeatedly to display “Divide ?”,
then press SET/ENTER.
“Check” appears momentarily, then “Divide OK ?”
appears and the MD recorder starts repeating the point
where the track will be divided.
4 If necessary, use $ or › to adjust the
position of the point where the track will be
divided.
The dividing position can be adjusted up to 2 second (255
steps) in either direction.
5 Press SET/ENTER.
The track is divided and “Complete” appears
momentarily.
UNDO
The UNDO function lets you immediately return to the
condition before an edit is made (note: you cannot undo
an edit once you press any other button).
1 Press & to stop the MD recorder.
2 Press EDIT repeatedly to display “Undo ____
*1
”,
then press SET/ENTER.
“Undo OK ?” appears in the display. To cancel undoing,
press &.
____*1
: The name of editing you can undo is displayed here.
3 Press SET/ENTER again to undo.
Note
You cannot undo an edit once it has been written to the TOC.
DISC MAINTENANCE
This unit features two disc maintenance functions which
optimize performance of your MD discs. The TOC
WRITE function allows you to write any edits to the
TOC without having to eject the disc. The FRA CHECK
function recovers recordable space on a disc that may
have been lost because of multiple edit operations.
TOC WRITE
When making a recording, the TOC (Table Of Contents)
of the MD is written as soon as recording is finished.
When making disc edits or titling, however, the TOC
isn’t automatically written unless the disc is ejected. If
the unit is accidentally turned off before writing edits or
titling to the TOC, it is possible that these changes will
not be saved. By using this function, you can ensure that
your edits or titles are saved on the disc.
1 Press & to stop playback.
2 Press EDIT repeatedly to display
“TOC Write ?”, then press SET/ENTER.
“TOC Write OK ?” appears.
3 Press SET/ENTER.
“TOC Writing” blinks in the display momentarily.
Note
The TOC Write function can only be selected when the TOC
indicator is lit in the display.
FRA CHECK
When edit functions such as “MOVE” and “DIVIDE”
are performed, spaces of recordable space may be lost
and “TOC Full” may appear in the display to indicate
that no more recording can be performed. When this
occurs, it may be possible to recover the FRA (Freely
Recordable Area) on the disc that was lost during edit
functions so that more recording is possible.
1 Press & to stop playback.
2 Press EDIT repeatedly to display
“FRA Check ?”, then press SET/ENTER.
“FRA Check OK ?” appears.
3 Press SET/ENTER.
“Complete” appears momentarily.
12
AB DEC
3456
12
A B C2 DC1
3456
Before
dividing
After
dividing
To Next Page
Loading...
Need help?
General
