EasyManuals Logo
Home>Yamaha>Motorcycle>MT-10SP

Yamaha MT-10SP User Manual

Yamaha MT-10SP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Periodic maintenance and adjustment
8-24
1
2
3
4
5
6
7
8
9
10
11
12
13
EAU22734
Changing the brake fluid
Have a Yamaha dealer change the
brake fluid every 2 years. In addition,
have the seals of the master cylinders
and brake calipers, as well as the brake
hoses replaced at the intervals listed
below or sooner if they are damaged or
leaking.
Brake seals: every 2 years
Brake hoses: every 4 years
EAU22762
Drive chain slack
The drive chain slack should be
checked before each ride and adjusted
if necessary.
EAU74253
To check the drive chain slack
1. Place the motorcycle on the sides-
tand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the neu-
tral position.
3. Measure the drive chain slack as
shown.
4. If the drive chain slack is incorrect,
adjust it as follows. NOTICE: Im-
proper drive chain slack will
overload the engine as well as
other vital parts of the motorcy-
cle and can lead to chain slip-
page or breakage. To prevent
this from occurring, keep the
drive chain slack within the
specified limits.
[ECA10572]
EAU74260
To adjust the drive chain slack
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Drive chain slack
Drive chain slack:
20.0–30.0 mm (0.79–1.18 in)
111
BGG-28199-11.book 24 ージ 2022年8月25日 木曜日 午後3時8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT-10SP and is the answer not in the manual?

Yamaha MT-10SP Specifications

General IconGeneral
BrandYamaha
ModelMT-10SP
CategoryMotorcycle
LanguageEnglish

Related product manuals