35
P-515 Owner’s Manual
Playing Various Musical Instrument Sounds (Voices)
You can fine-tune the pitch of the entire instrument. This function is useful
when you play this instrument along with other instruments or recorded
music.
1. Press the [FUNCTION] button repeatedly to call up the
“System” menu display. Select “Tuning” by using the [u]/
[d] buttons and then press the [>] button.
2. Use the [u]/[d] buttons to select the “Master Tune,” then
press the [>] button.
3. Set the tuning value by using the [<]/[>] buttons. To reset
the value to the default setting (A3=440.0Hz), press the
[<]/[>] buttons simultaneously.
4. Press the [EXIT] button to close the “Master Tune” display.
Fine Tuning the Pitch (Master Tune)
[u]/[d]/[<]/[>]
buttons
[EXIT] button[FUNCTION]
button
Default setting: A3=440.0Hz
Setting range: A3=414.8Hz
– 440.0Hz – 466.8Hz (in
approximately 0.2 Hz
increments)
• If you change the tuning
value here, the value in the
Piano Room display
(page 26) is also changed.
• These settings will not be
applied to the Drum Kit
Voices or Audio Song. Also,
these settings will not be
recorded to a MIDI Song.
To Next Page
Loading...
Need help?
General
