P-90 Detailed Settings – [FUNCTION]
ENGLISH
39
This function conveniently lets you set opera-
tion of the sustain pedal to one of the modes
listed below.
1. Engage Function mode and select .
2. Press the [+/YES] button to engage the other
functions’ sub-mode, then use the [TEMPO/
FUNCTION# ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the val-
ues.
Sub-mode
F5.3
Sustain Sample Depth
Setting range: 0 – 20
Normal setting: 12
The [GRAND PIANO 1] voices feature special “Sustain
Samples” that recreate the unique resonance of an acous-
tic grand piano’s soundboard and strings when the sus-
tain pedal is pressed. This function lets you adjust the
depth of this effect.
F5.4 Key-off Sample Volume
Setting range: 0 – 20
Normal setting: 10
You can adjust the volume of the keyoff sound (the sub-
tle sound produced when the keys are released) for voices
[GRAND PIANO1], [CLAVI./HARPSI.] (including their
variations).
You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage Function mode and select .
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range: 1 – 20
Normal setting: 10
SHORTCUT:
You can jump directly to the metronome functions by
pressing the [FUNCTION] button while holding the METRO-
NOME [START/STOP] button.
Even if you entered a Function mode via a shortcut, you must
use the usual method to exit (i.e., press [FUNCTION] button
to make the function indicator go dark).
This function sets the volume at which a “can-
celed” part is played during preset song play-
back. Adjust the part volume to a comfortable
level and use the “canceled” part as a guide
with which to play along.
1. Engage Function mode and select .
2. Use the [–/NO] and [+/YES] buttons to set the
volume as required.
Setting range: 0 – 20
Normal setting: 5
F5. Other Functions F6. Metronome Volume
F7. Preset Song Part Cancel Volume
To Next Page
Loading...
Need help?
General
