CS-R5 Owner’s Manual
29
Please visit the Yamaha Pro Audio global website for a list
of frequently asked questions (FAQ).
http://www.yamahaproaudio.com/
Power does not turn on.
❍ Make sure that the power switches are turned ON.
❍ Make sure that the AC power cords are connected.
➥ If the power still does not turn on, contact your Yamaha
dealer.
The unit is not receiving an audio input signal.
❍ If you are using an optional card, make sure that it is
installed properly.
❍ Make sure that the cables are connected properly.
❍ Make sure that the [ON] key indicator of the input
channel lights steadily.
❍ Make sure that the fader of the input channel is raised.
Sound is not loud enough.
❍ Make sure that the head amp gain is set to an
appropriate level.
❍ Make sure that the digital gain is set to an appropriate
level.
❍ Make sure that the fader of the input channel is raised.
❍ Make sure that the fader of the output channel is raised.
Sound is distorted.
❍ Make sure that the head amp is set correctly.
❍ Make sure that the fader of the input channel is not
raised too high.
❍ Make sure that the fader of the output channel is not
raised too high.
Touch screens, LEDs and/or lamps are not bright
enough.
❍ The brightness parameter on the SETUP screen may be
set too low.
In the LCD display, there are some dots that are
always dark or always lit.
❍ This is a common property of color LCD, not a
malfunction.
Troubleshooting
To Next Page
Loading...
Need help?
General
