Yamaha RX-V681 Service Manual

159
RX-V681/RX-A760
RX-V681/RX-A760
RX-V681
1
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
FIRMWARE UPDATING PROCEDURE
FIRMWARE UPDATING PROCEDURE
RX-V681

Yamaha RX-V681 Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
4Ω speaker support	Yes
Audio output channels	7.2 channels
Total Harmonic Distortion (THD)	0.06 %
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	150 W
HDMI in	6
Audio (L/R) in	5
Remote (IR) input	1
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Audio (L/R) out	0
Headphone connectivity	3.5 mm
Product color	Silver
Audio decoders	DTS Neo:X, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD
Apple docking compatibility	-
Banana connector	14
Connectivity technology	Wired & Wireless
Speakers connectivity type	Banana connector/Binding posts
Supported radio bands	AM, FM
Optical drive included	No
Supported video modes	2160p
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	378 mm
Width	435 mm
Height	171 mm
Weight	10000 g