47
English
INTRODUCTION
PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
REMOTE CONTROL FEATURES
2
1
3
5
4
@
#
!
2
5
4
1
3
6
Commonly Used Buttons in Any
Position of the Selector Dial
Regardless of the position of the selector dial, you can
control this unit and your TV with the following buttons.
Note
• You have to set up the code for your TV in the TV position
before you can control the TV.
■ Controlling this unit
See pages 6 and 7.
1 STANDBY
2 POWER
3 VOLUME +/–
4 SLEEP
Note
• If you have set up the code for your TV and set the selector dial
to the TV position, this button is used to set the sleep timer for
the TV.
5 MUTE
Note
• If you have set up the code for your TV and set the selector dial
to the TV position, this button is used to mute the TV sound.
■ Controlling your TV
! TV POWER
@ TV INPUT
# TV VOLUME +/–
Controlling the Components
Connected to This Unit
The example below describes the procedure for
controlling a YAMAHA CD player.
1 Set the selector dial to the
CD position.
2 Turn on the power.
3 Press INPUT.
The indicator lights up for
about 3 second.
4 Press CD while the
indicator is lit.
5 Press p.
See page 48 for the CD player
operation buttons.
6 Adjust the volume.
If you set the remote control with the manufacturer
codes listed from page i at the end of this
manual, you can control other brands of components.
See “Setting the Manufacturer Codes” on page 51 for
details.
To Next Page
Loading...
Need help?
General
