PERIODIC MAINTENANCE AND MINOR REPAIR
6-48
6
6. Connect the headlight coupler.
7. Install the headlight bulb cover by
turning it clockwise.
8. Install the panel.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU03730
Tail/brake light
This motorcycle is equipped with an
LED type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU03497
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it
counterclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
ECA00065
@
Do not overtighten the screw, other-
wise the lens may break.
@
1. Screw
U5SL10.book Page 48 Friday, November 1, 2002 4:33 PM
To Next Page
Loading...
Need help?
General
