INSTRUMENT AND CONTROL FUNCTIONS
3-16
3
EAU01084
Catalytic converter
This motorcycle is equipped with a cat-
alytic converter in the exhaust cham-
ber.
EW000128
WARNING
_
The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
_
EC000114
CAUTION:
_
The following precautions must be
observed to prevent a fire hazard or
other damages.
●
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
●
Never park the motorcycle near
possible fire hazards such as
grass or other materials that
easily burn.
●
Do not allow the engine to idle
too long.
_
EAU03814*
Seats
Rider seat
To remove the rider seat
Pull back the rear of the rider seat as
shown, remove the bolts, and then pull
the seat off.
To install the rider seat
Insert the projection on the front of the
rider seat into the seat holder as
shown, place the seat in the original
position, and then install the bolts.
1. Bolt (× 2) 1. Projection
2. Seat holder
U5SL10.book Page 16 Friday, November 1, 2002 4:33 PM
To Next Page
Loading...
Need help?
General
