Yamaha Z200 - Page 62

Operation
56
1. Place the remote control lever in “”
(neutral).
T
IP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3. Turn the main switch to “” (on).
T
IP:
Dual engine users: When the main switch is
turned on, the buzzer operates for a few sec-
onds then stops automatically. The buzzer
also operates if one of the engines stalls.
4. Turn the main switch to “” (start),
and hold it for a maximum of 5 seconds.
N
ZMU04588
ON
STARTOFF
ON
STARTOFF
ZMU04589
OFF
ON
ZMU01880
OFF
ON
OFF
ON
ZMU04591
✩✫✳✬✤✲ ✩  
©2019 Yamaha Motor Corporation, U.S.A.