1 RECEIVING
15
1 RECEIVING
The braking resistor unit and braking unit have been put through severe tests at
the factory before shipment. After unpacking, however, check and see the follow-
ing. If any malfunctions are found, contact your YASKAWA representative.
• Their nameplate data meet your requirements.
• They have sustained no damage while in transit.
• Fastening bolts and screws are not loose.
1.1 NAMEPLATE
(1) NAMEPLATE INFORMATION (BRAKING UNIT)
(2) NAMEPLATE INFORMATION (BRAKING RESISTER UNIT)
• Do not install and attempt to use a braking resistor or braking resis-
tor unit If there are any damaged or missing components.
Failure to comply can result in personal injury.
For long term storage, the unit should be kept in a clean area
indoors.
To Next Page
Loading...
Need help?
General