EasyManuals Logo
Home>Yealink>Conference System>MVC840

Yealink MVC840 Deployment Guide

Yealink MVC840
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
| Troubleshooting | 69
Cannot Control the Camera
If you enable the tracking mode, you cannot control the camera. See Enabling Manual Control Mode to
enable the manual control mode.
Does the MVC/MVC
System Come with All the Necessary Software Pre-installed?
The MVC/MVC
system comes with factory imaged Windows 10 IoT and is installed with all the
necessary software. The only requirement is Teams, Skype for Business or Lync credentials to run on the
MVC
system. For more information, refer toMicrosoft Teams Rooms.
The Room Is Not Enabled for Teams Meetings
You should enable Teams meeting mode on your system before using the Teams meetings.
Procedure
1. Tap More > Setting.
2. Enter the administrator password (default: sfb) to go to the Settings page.
3. In the Account page, select Skype for Business (default) and Microsoft Teams or Skype for
Business and Microsoft Teams (default) from the Supported meeting mode field.
4. Tap Save and exit.
The configuration takes effect after the system restarts.
There Is No Content Displayed on the Second Display
Do one of the following:
Ensure both displays are properly connected to the HDMI ports on the back of the MCore/Mini-PC.
Ensure the Dual Monitor mode is enabled.
Restart the device if necessary.
Related tasks
Enabling Dual Monitor Mode
Are Any Anti-virus Software Needed to Be Installed on the MCore/Mini-PC?
Microsoft itself has Windows Defender, a legitimate anti-virus protection plan already built into Windows 10.
However, not all antivirus software is the same and you can choose anti-virus software based on its ability
to defend against threats.
Restarting the Device
After you restart the device, it will automatically launch the Teams Room Systems app and sign in the
account.
Procedure
Tap More > Restart Device.

Table of Contents

Other manuals for Yealink MVC840

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink MVC840 and is the answer not in the manual?

Yealink MVC840 Specifications

General IconGeneral
BluetoothYes
Pan range0 - 200 °
Product typeGroup video conferencing system
Product colorBlack, Grey
Tilt angle range0 - 130 °
Number of cameras1
Number of persons- person(s)
Number of microphone arrays3
Megapixel- MP
Camera typeSingle camera
Sensor type-
Image sensor size- \
Diagonal field of view80 °
Vertical field of view130 °
Horizontal field of view200 °
Optical zoom (normal mode)12 x
USB connector typeUSB Type-B
HDMI output ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity4
Maximum frame rate30 fps
Display diagonal8 \
Touchscreen typeCapacitive
Display resolution1280 x 800 pixels
Internal memory8000 MB
Storage media typeSSD
Total storage capacity128 GB
Ethernet LAN data rates10, 100, 1000 Mbit/s
Processor familyIntel® Core™ i5
Computer system typeMini PC
Operating system installedWindows 10 IoT
Harmonized System (HS) code85176990

Related product manuals