Yealink SIP-T26P User Manual

Enterprise IP Phone Customizing Your Phone
2) Input the Phone book URL and the phone book name, then click the Confirm button
to save the changes.
3) After the setting, go to the Address Book via phone interface, you will see the
remote address book you have just added:
4) Choose a specific one, and press the Enter softkey, it will go to the corresponding
URL address to download the contact information for you.
Note:
This IP phone can support 5 remote phone books at most.
Other Settings
Logo Customization
You can upload your own logo which displayed on the idle screen.
1) Prepare the desired the logo file which is
--in BMP format,
--max pixels: 132*64,
--black & white picture.
2) Run PictureExDemo.exe, click Add button->choose the specific logo file->click
Convert, and then close the software.
3) A new-built folder named adv with a .dob file will be created.
4) If you want to add more logos to your phone, you can follow the above steps to
repeat the operation.
5) There will be an advertising.index file in the created adv file, open it and you can
edit the show time of the specific logo, the units is millisecond. For example:
log2.dob,3000 means the logo 2 will show 3 seconds on the LCD.
- 21 -

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g