Yealink SIP-T26P User Manual

Enterprise IP Phone Using the Advanced Phone Functions
To change the administrator password via Phone interface:
1) Press the softkeys Menu, scroll to Settings, press Enter softkey, use the navigation
keys to highlight Advanced Settings.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Set Admin Password, press Enter softkey.
4) You are prompted to enter the old and new password, Press Ab3 softkey to change
the input method.
5) Press OK softkey to confirm the change, or Cancel softkey to return to the previous
menu.
To change the administrator password via Web interface:
Choose Password->admin, enter the old and new password, choose Confirm button to
save the changes, or Cancel button to cancel the changes.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
To reboot via Web interface:
1) Choose Upgrade->Basic.
2) Click Reboot button.
Note:
You can only reboot from Web interface. Please do not power off during reboot, or it will
cause the flash memory error.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider’s advice.
To reset to factory via phone interface:
1) Press the Menu softkey, scroll to Settings, press Enter softkey, use the navigation
keys to highlight Advanced Setting.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Reset to Factory, press Enter softkey.
4) You are prompted to confirm the change, press OK softkey to reset to factory
settings, press Cancel softkey to return to previous menu.
- 36 -

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g