User Guide for the SIP-T27G IP Phone
102
You can press or to switch between calls, and then press the Resume soft key to
retrieve the desired call.
Note
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free (speakerphone) mode:
Do one of the following:
- Press .
- With the handset on-hook and the headset mode deactivated, press the Answer soft key.
- With the handset on-hook and the headset mode deactivated, press the line key with the
fast-flashing green LED indicator.
To answer a call using the headset:
Do one of the following:
- Press .
- With the headset mode activated, press the Answer soft key.
- With the headset mode activated, press the line key with the fast-flashing green LED
You can reject incoming calls by pressing the X key or the Reject soft key. You can also activate
Do Not Disturb mode to ignore the incoming calls without ringing on your phone. For more
information, refer to Do Not Disturb (DND) on page 112.
You can forward incoming calls to someone else by pressing the Forward soft key. For more
information, refer to Call Forward on page 117.
If multiple accounts are registered on the phone, you can first press the desired line key on the
idle screen or press the Line soft key on the dialing screen, and then you can use the selected
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g