User Guide for the SIP-T27G IP Phone
30
- To delete the saved wireless network profile(s):
1) Select Delete or Delete All from the prompt list.
If you delete your wireless network profile from your phone, you need to
manually connect to it next time.
Disconnecting the Wireless Network Connection
To disconnect wireless network via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi->X Available Network(s) (X represents
the number of available networks)
2. Select the connected wireless network, and then press the Disconnect soft key.
The wireless network is disconnected. You can press the Connect soft key to connect
again.
Deactivating the Wi-Fi Mode
To deactivate the Wi-Fi mode via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or , or the Switch soft key to select Off from the Wi-Fi field.
3. Press the Save soft key to accept the change.
The Wi-Fi icon disappears from the status bar.
Wi-Fi is configurable via web user interface at the path Network->Wi-Fi.
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T27G IP phone supports up to 6
accounts. If your phone is not registered, you may have to register it. For more information on
how to register your phone, refer to Account Management on page 88.
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g