Yealink SIP-T2XP Administrator's Guide

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
100
2． Select the desired value from the pull-down list of Busy Tone Delay (Seconds).
3． Click Confirm to accept the change.
Return code when refuse defines the return code and reason of the SIP response
message for the refused call. The caller’s phone LCD screen displays the reason
according to the received return code. Available return codes and reasons are:
 404 (Not found)
 480 (Temporarily not available)
 486 (Busy here)
Procedure
Return code for refused call can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Specify the return code and the
reason of the SIP response
message when refusing a call.
For more information, refer to
Return Code When Refuse on
page 320.
Local
Web User Interface
Specify the return code and the
reason of the SIP response
message when refusing a call.
Navigate to:

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English