User Guide for the SIP-T40P IP Phone
30
Time and date are configurable via web user interface at the path Settings->Time & Date.
Note
Administrator Password
The Advanced Settings option is only accessible to the administrator. The default administrator
password is “admin”. For security reasons, you should change the default administrator
password as soon as possible.
To change the administrator password via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) -> Change
Password.
2. Enter the current password in the Old PWD field.
3. Enter the new password in the New PWD field.
4. Re-enter the new password in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path Security->Password.
Key As Send
You can set the “#” key or “*” key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Features->Key As Send.
You can also customize the date format. Contact your system administrator for more information.