EasyManuals Logo
Home>Yealink>IP Phone>SIP-T40P

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
User Guide for the SIP-T40P IP Phone
64
Dependencies:
Type (Key Event)
Key Type (SMS)
Label (key label displayed on the LCD screen)
Usage: Press the SMS key when the phone is idle to access text message.
Group Listening
You can use this key feature to activate the Speakerphone and Handset/Headset mode at the
same time. It is suitable for the group conversations which have more than one person present
at one end. You are able to speak and listen through the handset/headset, while the others
nearby can only listen through the speaker.
Dependencies:
Type (Key Event)
Key Type (Group Listening)
Label (key label displayed on the LCD screen)
Usage:
1. During a call, press the Group Listening key to activate the group listening mode.
You can then speak and listen through the handset/headset, while other people at your
side can only listen through the speaker at the same time.
2. Press the Group Listening key again to deactivate the group listening mode.
Zero Touch
You can use this key feature to quickly configure auto provision and network parameters.
Dependencies:
Type (Key Event)
Key Type (Zero Touch)
Label (key label displayed on the LCD screen)
Usage:
1. Press the Zero Touch key to access the zero touch screen.
2. Press the OK soft key within a few seconds.
3. Configure the network parameters in the corresponding fields.
4. Press the Next soft key.
5. Configure the auto provision parameters in the corresponding fields.
6. Press the OK soft key.
The phone will reboot to update configurations.
URL
You can use this key feature to trigger the phone to send an HTTP GET request containing a
specific URL.
Dependencies:
Type (URL)
Label (key label displayed on the LCD screen)
Value (the URL contained in the HTTP GET request)

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals