Yealink SIP-T48G Quick Start Guide

Blind Transfer:
Call Transfer
You can transfer a call in the following ways:
1. Press or tap during an active call. The call is placed on hold.
3. Press or tap .
2. Enter the number or tap the desired contact from the desired group you want to transfer to.
Consultative Transfer:
1. Tap during an active call. The call is placed on hold.
3. Press or tap when the second party answers.
You can also tap the avatar of the desired contact in the Favorites screen.
2. Enter the number or tap the desired contact from the desired group you want to transfer to, then press or
tap .
Call Forward
To enable call forward:
1. When the phone is idle, tap ->Features->Call Forward, or you can also press to enter the call
forward setting creen.
2. Tap the On radio box of the Call Forward field.
3. Do one of the following:
a. Select Forward to Voice Mail.
b. Select Forward Calls to Number or Contact.
Enter a phone number that you want to forward incoming calls to, then tap , or enter the first few
continuous characters of the contact name or the contact number, tap the desired entry from the result
list, and then tap or press .
Incoming calls will be forwarded to the preset number automatically.
Incoming calls will be forwarded to voice mail automatically.
c. Select Simultaneously Ring .
Enter a phone number that you want to ring simultaneously, then tap , or enter the first few continuous
characters of the contact name or the contact number, tap the desired entry from the result list, and then
tap or press .
The preset number will ring simultaneously when your phone receives an incoming call.
.
Call Mute and Un-mute
Call Hold and Resume
To place a call on hold:
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press
If there is only one call on hold, press or tap .
1. Press or tap during an active call.
5
You can also tap the avatar of the desired contact in the Favorites screen.
4. Tap or press .
To disable call forward:
1. When the phone is idle, tap ->Features->Call Forward, or you can also press to enter the call
forward setting screen.
again to un-mute the call.
If there is more than one call on hold, tap the call you want to resume, and then press or tap .

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm