User Guide for the SIP-T48S IP Phone
190
saved as *.wav files on your USB flash drive. You can also record active calls by tapping a record
key on the phone. The recordings are saved on the server.
Note
Recording Using a USB Flash Drive
You can attach a USB flash drive to your IP phone when the phone is idle or during an active call.
This feature is not available by default. For more information, contact your system administrator.
When the phone is idle, and you insert a USB flash drive into the USB port on your phone, the
phone will detect the USB flash drive and display a flashing icon . After detecting the USB
flash drive, the icon stops flashing and LCD screen prompts “USB device has been connected
successfully!”.
When there is an active call, and you insert a USB flash drive into the USB port on IP phone, the
LCD screen will prompt “USB device has been connected successfully! Available Recording Time:
XX:XX:XX”. For more information on the available recording time, refer to Viewing the Storage
Space on page 196.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.