Phone Customization
233
Yealink phones support three display methods: Label, Display Name, and User Name. You can customize the
account information to be displayed on the IP phone as required.
Topic
Display Method on Dialing Configuration
Display Method on Dialing Configuration
The following table lists the parameters you can use to configure the display method on dialing.
Parameter
features.caller_name_type_on_dialing <y0000000000xx>.cfg
Description
It configures the selected account information displayed on the pre-dialing or dialing screen.
Note: It works only if “features.station_name.value” is left blank.
Permitted
Values
1-Label, configured by the parameter “account.X.label”.
2-Display Name, configured by the parameter “account.X.display_name”.
3-User Name, configured by the parameter “account.X.user_name”.
Default
3
Web UI
Features > General Information > Display Method on Dialing
Key As Send
Key as send allows you to assign the pound key (“#”) or asterisk key (“*”) as the send key.
Topic
Key As Send Configuration
Key As Send Configuration
The following table lists the parameters you can use to configure the key as send.
Parameter
features.key_as_send <y0000000000xx>.cfg
Description
It configures the "#" or "*" key as the send key.
Permitted
Values
0-Disabled, neither “#” nor “*” can be used as the send key.
1-# key
2-* key
Default
1
Web UI
Features > General Information > Key As Send
Phone UI
T54W/T46U/T46S/T46G/T29G:
To Next Page
Loading...
Need help?
General