Call Features
20
Tip: By default, you can long press the desired line key to set it.
When the phone is idle, you can press the Speed Dial key to call a contact quickly. The phone calls a contact using
the configured line by default. If you want to call a contact using another line, you can first press the line key, and
then press the Speed Dial key.
Note: During a call, you can press the Speed Dial key to select a transfer mode. Check with your system administrator to find
out if this feature is available on the phone.
Placing a Call Back to the Last Incoming Number
You can redial the last incoming number quickly by using a Recall key.
Procedure
1. Go to Menu > Features > Dsskey.
2.
Select the desired line key.
3. Select Key Event from the Type field.
4. Select Recall from the Key Type field.
5. (Optional.) Enter the string that will appear on the phone screen in the Label field.
6. Select Save.
Tip: By default, you can long press the desired line key to set it.
When the phone is idle, press the Recall key to quickly redial the last incoming number.
Redialing a Number
The phone keeps a record of all the placed calls. You can recall the contact you recently called.
Procedure
1.
Press the REDIAL key .
A record of Placed Calls is displayed on the phone screen.
2. Highlight the desired record, select Send.
Tip: Press the REDIAL key twice to recall the contact you called.
Dialing a Hotline Number
When the phone is off-hook, it will dial out the hotline number automatically after the designated delay time.
Procedure
1. Go to Menu > Features > Hot Line.
On the T33P/T33G phones, go to Menu > Features > Others > Hot Line.
2.
Do one of the following:
l
Enter the desired number in the Hotline Number field.
l
Press Directory (Dir) and select a desired contact from the Directory list.
3. Enter the desired delay time (0-10 seconds) in the Hotline Delay field.
4. Select Save.
Placing an International Call
You can place calls to international phone numbers on your phone.
Procedure
1. Long press digit key 0 on the phone keypad until the plus sign (+) appears.
To Next Page
Loading...
Need help?
General
