Yealink T30 User Manual

Call Features
28
The phone ignores engaged audio device (handset or headset) and plays beep in the Speakerphone (hands-free)
mode by default.
Note: When you have multiple calls on the phone and the current call is held, you can press the corresponding line key to
swap to the active call.
Resuming a Held Call
You can view and resume a held call on the phone.
Procedure
1. Select Resume.
If multiple calls are placed on hold, select the desired call first.
Note: When you have multiple calls on the phone and the current call is active, you can select Swap to swap to the held call.
Redirecting Incoming Calls
When you are not available to answer calls on your phone, you can forward the calls to another phone.
Topics
Forwarding All Incoming Calls to a Contact
Forwarding an Incoming Call Manually
Forwarding Incoming Calls with a Forward Key
Diverting Calls to a Contact
Forwarding All Incoming Calls to a Contact
You can set up the forwarding type which enables your phone to forward all incoming calls to a contact.
There are three types of forwarding:
l
Always Forward: Forwards all incoming calls immediately.
l
Busy Forward: Forwards incoming calls when you are busy in a call.
l
No Answer Forward: Forwards incoming calls when no one answers the calls.
Topics
Forwarding All Incoming Calls on All Lines
Forwarding All Incoming Calls on a Specific Line
Deactivating Call Forward
Forwarding All Incoming Calls on All Lines
You can forward all incoming calls on the phone.
Before You Begin
Check with your system administrator if the forward on code or off code is required. If required, get it from your sys-
tem administrator.
Procedure
1. Go to Menu > Features > Call Forward.
2. Select the desired forwarding type and select Enabled or On from the corresponding field.
3.
Do one of the following:
l
Enter the contact number you want to forward incoming calls to in the Forward to field.
l
On the T33P/T33G phones, highlight the Forward to field. Press Directory (Dir), and select the desired con-
tact from the Directory list.

Yealink T30 Specifications

General

PoE	No
Audio Features	HD Voice, Full-duplex speakerphone
Wall Mountable	Yes
Network	10/100M Ethernet
Local Phonebook	1000 entries
Display	2.3" 132x64-pixel graphical LCD
Ports	2 x RJ45 Ethernet ports