Name: Yealink W73P
Brand: Yealink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Yealink W73P | User Guide

Page 17 of 18

Repeater Mode

The Yealink RT30 DECT Repeater can be used with the W73P to extend the range of the DECT

solution. All the usual handset functions are supported by the base station in the extended range.

The repeater, base station, and handset employee wireless connection. Repeater Mode is

unavailable if the handset is set up in Eco Mode.

1. Go to OK > Settings > System Settings > Repeater Mode.

2. Select a desired repeater and press OK. The handset prompts whether to reboot this base

station.

3. Confirm the action. The base station reboots to make the change take effect. The change is

applied to all the handset registered to the base station.

Repeater has the same radio coverage (up to 300m in unobstructed outdoor areas and up to 50m

inside buildings) as the base station. Repeater does not increase the quantity of call paths. It shares

the call paths with the base station. The W73P will support "Cascade Mode", which allows "daisy

chaining" of up to 2 repeaters, as well as the standard "Star Mode" of up to 6 repeaters.

For full details on the RT30 repeater, please download the Yealink DECT Repeater RT30 guide.

Other manuals for Yealink W73P

Questions and Answers:

Need help?

Do you have a question about the Yealink W73P and is the answer not in the manual?

General

Handset type	Wireless handset
Product type	IP mobile phone
Product color	Gray
Keypad illumination	Yes
Caller ID	-
Lines quantity	- lines
Phonebook capacity	100 entries
Battery voltage	3.7 V
Battery capacity	1010 mAh
Input current	0.2 A
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Number of handles included	- pc(s)
Harmonized System (HS) code	85171800