York YCAL0046 User Manual

JOHNSON CONTROLS
138
FORM 150.67-NM1
ISSUE DATE: 4/28/2017
SECTION 5 – TECHNICAL DATA
RD-Style
Isolators
DURULENE ISOLATOR CROSS-REFERENCE
MOUNT
TYPE
DIMENSION DATA (INCHES)
L W HF AL AD BT CD DW
RD1-WR 3.13 1.75 1.25 2.38 0.34 0.19 5/16-18 UNC X 3/4 1.25
RD2-WR 3.88 2.38 1.75 3.00 0.34 0.22 3/8-16 UNC X 1 1.75
RD3-WR 5.50 3.38 2.88 4.13 0.56 0.25 1/2-13 UNC X 1 2.50
RD4-WR 6.25 4.63 2.75 5.00 0.56 0.38 1/2-13 UNC X 1 3.00
MODEL NUMBER
RATED
CAPACITY
[LBS]
RATED
DEFLECTION
[IN]
DURO
(± 5)
RD2-LIGHT BLUE-WR
35 0.4 30
RD2-BROWN-WR
45 0.4 40
RD2-BRICK RED-WR
70 0.4 50
RD 2-LIME-WR
120 0.4 60
MODEL NUMBER
RATED
CAPACITY
[LBS]
RATED
DEFLECTION
[IN]
DURO
(± 5)
RD2-LIGHT BLUE-WR
135 0.5 30
RD2-BROWN-WR 170 0.5 40
RD2-BRICK RED-WR 240 0.5 50
RD 2-LIME-WR 380 0.5 60
RD2 CHARCOAL-WR 550 0.5 70
MODEL NUMBER
RATED
CAPACITY
[LBS]
RATED
DEFLECTION
[IN]
DURO
(± 5)
RD3-BROWN-WR 250 0.5 40
RD3-BRICK RED-WR 525 0.5 50
RD3-LIME-WR 750 0.5 60
RD3-CHARCOAL-WR 1100 0.5 70
MODEL NUMBER
RATED
CAPACITY
[LBS]
RATED
DEFLECTION
[IN]
DURO
( 5)
RD4-BROWN-WR 1500 0.5 40
RD4-BRICK RED-WR 2250 0.5 50
RD4-LIME-WR 3000 0.5 60
RD4-CHARCOAL-WR 4000 0.5 70
FIGURE 33 - DURULENE ISOLATOR CROSS-REFERENCE
L
AL
DW
BT
HF
ø AD THRU
TYP 2 PLACES
MOLDED
DURULENE
CD
W
Notes:
1. All dimensions are inches, interpreted per ANSI Y14.
2. Refer to next page for installation instructions.
3. Mount molded in weather resistant duralene compound as standard. Also available in other materials
such as natural rubber, extreme high temperature silicone, high-damped silicone, nitrile and EDPM.
4. AL = Mounting hole center to center spacing.
5. HF = Free height of mount, prior to loading. Operating height calculated by the free height less the
static deflection under load. All dimensions for reference only.
6. Hardware zinc-electroplated.
Notes:
1. All dimensions are inches, interpreted per ANSI Y14.
2. Refer to next page for installation instructions.
3. Mount molded in weather resistant duralene compound as stan-
dard. Also available in other materials such as natural rubber,
extreme high temperature silicone, high-damped silicone, nitrile
and EDPM.
4. AL = Mounting hole center to center spacing.
5. HF = Free height of mount, prior to loading. Operating height
calculated by the free height less the static deection under load.
All dimensions for reference only.
6. Hardware is zinc-electroplated.

York YCAL0046 Specifications

General

Brand	York
Model	YCAL0046
Category	Chiller
Language	English