FORM 160.87-OM1
ISSUE DATE: 8/24/2018
JOHNSON CONTROLS
138
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Hot Gas Control (Enabled/Disabled)
Access Level Required: SERVICE
Enables and disables the optional Hot Gas Bypass
Control feature.
Level Control
Automatically set to Analog.
OptiSave
Automatically set to Disabled.
VGD (Enabled/Disabled)
Access Level Required: SERVICE
Enables and disables the Variable Geometry Diffuser
feature. If equipped with this feature, it should be en-
abled. Otherwise, it should be disabled.
Flow Switch
Access Level Required: SERVICE
Used to enter the applicable flow switch type. Paddle-
type (TB4) or Thermal-Type (J14) Flow sensors.
Chiller Style/Compressor
Access Level Required: SERVICE
Automatically set to Style G/K6-7 Compressor.
Edit Phone Numbers
Access Level Required: SERVICE
Displays up to two service phone numbers. The Re-
gional service phone number is displayed as the
first number. Although the label and number can be
changed appropriately, the default for this entry is
“Johnson Controls North American Toll Free Number
1-800-861-1001”. The Local service phone number is
displayed as the second number. Although blank by de-
fault, the appropriate label and number can be entered
by a Service Technician.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Setup
Access Level Required: VIEW
Returns user to SETUP Screen.
To Next Page
Loading...
Need help?
General