York YKFE12BXEXBH-RX User Manual

5
Low Medium High Auto
Key Functions
Indicator
1
24
3
1
2
4
3
5
1. Auto Mode:
Press the MODE button when
indicates.
The mode of operation, COOL or FAN, will be
automatically determined by room temperature.
2. Cool Mode:
The air conditioner is designed for cooling when
ambient temperature is 18-43°C.
Press the MODE button when
indicates.
Set the desired temperature with the TEMP+/-.
AUTO FAN SPEED is automatically determined
HIGH, MEDIUM or LOW speed according to the
difference between room and pre-set temperature.
3. FAN SPEED Mode:
(1) In modes other than Fan, the air speed can be
adjusted in order: Low, Medium, High and Auto.
(2) In FAN mode, the "Auto" is disabled.
4. Dry Mode:
Press the MODE button when
indicates. The Fan
speed is pre-set at auto speed.
5. Louver Selection:
(2) When you rstly press
, the icons of four air
deflectors simultaneously flash. Press the button
again to switch the display of air deflector icon.
Circulation mode of the four icons: All→1→2→3→4.
(3) When selected louver
, flashes,press swing
to adjust the angle of the louver. The icon will stop
flashing in ve seconds, the setting is conrmed.
(4) Angle of up-down swing.
6. TURBO/QUIET
(1) Press "TURBO/QUIET", the LCD displays
TURBO Mode is set.
Press "TURBO/QUIET" again, the controller LCD
displays the Quiet Mode is set. Press"TURBO/
QUIET" again to exit the setting of TURBO/QUIET.
Resume set air speed.
(2) This function is only enabled in Cool mode.
7. TIMER
Timer
Timer On
Press TIMER, the
ON
blinking.
Press TIME+/TIME- to
select the desirable time.
Press SET to conrm.
Timer Off
Press TIMER, the
OFF
blinking.
PressTIME+/TIME- to
select the desirable time.
Press SET to conrm.
Timer
On → Off
On ← Off
Intelligent TIMER for setting both
ON-OFF times at one time.
Press TIMER, the
ON
blinking.
Press TIME+/TIME- to
select the desirable start time.
Press TIMER, the
ON
blinking.
Press TIME+/TIME- to
select the desirable stop time.
Press SET to conrm.
EXIT
Press TIMER button again to
cancel timer setting and exit.
8. High rise Mode
(When the indoor unit installation is with high
ceiling)
To enable High Rise option, set temperature at
30°C under Cooling at high Fan speed, then press
the Sleep button 5 times within 2 seconds. The
High Rise mode is enabled. Temperature and fan
speed can now be adjusted back to desired setting.
To cancel the High Rise mode, set temperature
at 30°C under Cooling at High Fan Speed, press
Sleep button 5 times within 2 seconds. The High
Rise mode is cancelled.

York YKFE12BXEXBH-RX Specifications

General

Brand	York
Model	YKFE12BXEXBH-RX
Category	Air Conditioner
Language	English