- 9 -
b. Connecting
Cable connection
：
Power cable plug into the LCD AC input, and plug the male into the socket on
the wall or extension cord you have.
Adapter connection
：
AC Connector plugs into the socket on the wall or extension cord you have.
DC output connector plug into LCD DC input.
Signal connection
：
1. Switch off your LCD monitor and Main board before you connect the signal
cable.
2. 15 D-SUB plug behind the monitor.
3. Connect the other side of the 15 D-SUB terminal. For multi (GAME mode),
please use 5 pin signal cable and match up connector board.
4. Be sure to screw tightly for those signal connectors.
5. Power on the main power switch and LCD monitor power switch.
Note : Be sure to unplug the plugs of both IC Board and LCD monitor at the
same time and both of the power of LCD monitor and main board should
be connected on the same socket in order for LCD to catch the accurate
position of the display.
To Next Page
Loading...
General