EasyManuals Logo
Home>Zanussi>Hob>ZITN646K

Zanussi ZITN646K User Manual

Zanussi ZITN646K
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Unattended cooking on a hob with fat or oil can be dangerous and
may result in fire.
Never try to extinguish a fire with water, but switch off the appli-
ance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should not
be placed on the hob surface since they can get hot.
If the glass ceramic surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
After use, switch off the hob element by its control and do not rely
on the pan detector.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with
the appliance.
Keep the minimum distance from the other
appliances and units.
Always be careful when you move the appli-
ance because it is heavy. Always wear safety
gloves.
Seal the cut surfaces with a sealant to pre-
vent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
If the appliance is installed above drawers
make sure that the space, between the bot-
tom of the appliance and the upper drawer, is
sufficient for air circulation.
Make sure that the ventilation space of 2 mm,
between the worktop and the front of the be-
low unit, is free. The warranty does not cover
damages caused by the lack of an adequate
ventilation space.
The bottom of the appliance can get hot. We
recommend to install a non-combustile sepa-
ration panel under the appliance to prevent
access to the bottom.
Electrical connection
Warning! Risk of fire and electrical shock.
All electrical connections must be made by a
qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure the mains cable or plug (if applica-
ble) does not touch the hot appliance or hot
cookware, when you connect the appliance
to the near sockets
3
www.zanussi.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zanussi ZITN646K and is the answer not in the manual?

Zanussi ZITN646K Specifications

General IconGeneral
Boost functionYes
Large cooking zone2800 W
Number of boosters2
Simmer cooking zone1200 W
Regular cooking zone1800 W
Number of power levels15
Hob typeZone induction hob
Product colorBlack
Hob width size59 cm
Top surface typeCeramic
Appliance placementBuilt-in
Cooking zone 1 typeSimmer
Cooking zone 2 typeLarge
Cooking zone 3 typeRegular
Cooking zone 2 power2200 W
Cooking zone 1 positionLeft rear
Cooking zone 2 positionLeft front
Cooking zone 3 positionRight rear
Cooking zone 4 positionRight front
Number of cooking zones4 zone(s)
Simmer cooking zone shapeRound
Cooking zone 1 power sourceElectric
Large cooking zone diameter210 mm
Number of gas cooking zones0 zone(s)
Simmer cooking zone diameter145 mm
Regular cooking zone diameter180 mm
Control typeTouch
Built-in display-
Control positionTop right
Connected load (electric)- W
Weight and Dimensions IconWeight and Dimensions
Depth520 mm
Width590 mm
Height- mm
Cord length1.5 m
Installation compartment depth490 mm
Installation compartment width560 mm
Installation compartment height50 mm

Related product manuals