Zanussi ZITN646K User Manual

Heat setting displays
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
The Lock / The Child Safety Device operates.
The Power function operates.
The cookware is incorrect or too small, or there is no cookware on the cook-
ing zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Automatic Switch Off operates.
Residual heat indicator
Warning!
The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from the
heat of the cookware.
Daily use
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated
.
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). Remove the object or
clean the control panel.
• The appliance become too hot (e.g. when, a
saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be cool.
• You use not correct cookware. The symbol
comes on and the cooking zone deacti-
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deactivates. See
below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The cooking zone selection
To set the cooking zone touch the sensor field
related to this zone. The display highlights
the heat setting indication (
).
The heat setting
Set the cooking zone. Touch
to increase the
heat setting. Touch
to decrease the heat
setting. The display shows the heat setting.
Touch
and at the same time to deactivate
the cooking zone.
Power function
The Power function makes more power availa-
ble to the induction cooking zones (see “Cook-
ing zones power” table in the “Technical Infor-
mation” chapter). You can activate the Power
function for maximum 10 minutes. After that the
6
www.zanussi.com

Zanussi ZITN646K Specifications

General

Boost function	Yes
Large cooking zone	2800 W
Number of boosters	2
Simmer cooking zone	1200 W
Regular cooking zone	1800 W
Number of power levels	15
Hob type	Zone induction hob
Product color	Black
Hob width size	59 cm
Top surface type	Ceramic
Appliance placement	Built-in
Cooking zone 1 type	Simmer
Cooking zone 2 type	Large
Cooking zone 3 type	Regular
Cooking zone 2 power	2200 W
Cooking zone 1 position	Left rear
Cooking zone 2 position	Left front
Cooking zone 3 position	Right rear
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Simmer cooking zone shape	Round
Cooking zone 1 power source	Electric
Large cooking zone diameter	210 mm
Number of gas cooking zones	0 zone(s)
Simmer cooking zone diameter	145 mm
Regular cooking zone diameter	180 mm
Control type	Touch
Built-in display	-
Control position	Top right
Connected load (electric)	- W

Weight and Dimensions

Depth	520 mm
Width	590 mm
Height	- mm
Cord length	1.5 m
Installation compartment depth	490 mm
Installation compartment width	560 mm
Installation compartment height	50 mm