Zapi ACE2 User Manual

AF2ZP0CL - ACE2 - User Manual Page - 55/85
Flow Chart showing how to make Programme changes using Digital Console
fitted with Eprom CK ULTRA.
1) Opening Zapi Display.
AE2T2B ZP0.12
24V 400A 00000
2) Press ENTER to go into the General Menu.
' % '
' ' '
3) The Display will show:
MAIN MENU
PARAMETER CHANGE
4) Press ENTER to go into the Parameter Change
facility.
' % '
' ' '
5) The Display will show the first parameter.
ACCELERATION 0
2
6) Press either ROLL UP and ROLL DOWN to
display the next parameter.
% ' '
% ' '
7) The names of the Parameters appear on the
Display.
INV. ACCEL 0
1
8) When the desired Parameter appears, the
Display will show the parameter value. Press either
SET UP (Top Right) or SET DOWN (Bottom Right)
buttons to increase/decrease the value.
' ' %
' ' %
9) The Display will show the New Level.
INV. ACCEL 0
2
10) When you are satisfied with the results of the
changes you have made, Press OUT.
' ' '
' % '
11) The Display asks “ ARE YOU SURE?”.
ARE YOU SURE?
YES=ENTER NO=OUT
12) Press ENTER to accept the changes, or press
OUT if you do not wish to accept the changes and
wish to make further modifications to the
parameters.
' % '
' ' '
' ' '
' % '
13) The Display will show:
MAIN MENU
PARAMETER CHANGE

Zapi ACE2 Specifications

General

Brand	Zapi
Model	ACE2
Category	Inverter
Language	English