AEZZP0CB - MDI-CAN - User Manual Page - 13/13
A72 POWER FAILURE 2
A73 POWER FAILURE 1
A74 DRIVER SHORTED
A75 CONTACTOR DRIVER
A76 COIL SHORTED
A77 COIL INTERRUPTED
A78 VACC NOT OK
A79 INCORRECT START
A80 FORW + BACK
A81 BAD STEER 0 SET
A82 ENCODER ERROR
A83 BAD ENCODER SIGN
A84 STEER SENS KO
A85 STEER HAZARD
A86 PEDAL WIRE KO
A87 PEDAL FAILURE
A88 TRACTION BRUSHES
A89 PUMP BRUSHES
A90 DRIVER 1 KO
A91 DRIVER 2 KO
A92 DRIVER 1 SIC KO
A93 DRIVER 2 SIC KO
A94 INPUT ERROR 6
A95 INPUT ERROR 5
A96 INVERSION
A97 POSITION HANDLE
A98 INPUT ERROR 2
A99 INPUT ERROR 1
4 The 16A06 string corresponds to the NO COMMUNICATION alarm. It is the only
MDI-CAN alarm and it indicates a problem in the communication with the traction
controller. Check the connections between MDI-CAN and controller.
Important:
The alarms reported in the previous tables are referred to Zapi standard coding.
Customized software or special products can have same changes in the alarms
indications.
To Previous Page
Loading...
Need help?
General