Page - 4/13 AEZZP0CB - MDI-CAN - User Manual
1 FEATURES
1.1 Specifications
- ZAPI MDI-CAN is an indicator suitable for every type of battery powered
vehicle equipped with a high frequency traction controller from Zapimos
family.
- ZAPI MDI-CAN communicates with controllers directly by CAN-BUS.
- It is available also a serial link communication version wich is point to point
connected with a Zapi controller trought the serial interface. See Chapter 2.3
for the pin description.
- This Unit is supplied directly from the chopper and not by the battery. In this
way the same device can be used on systems with different battery voltages.
- The battery's state of charge is obtained with an advanced algorithm made
by the microprocessor. This algorithm considers the condition of braking or
large acceleration current demands from the drive motor.
- Using the Zapi PROGRAMMING CONSOLE, it is possible to make a
selection from 100 different types of discharge curves.
- ZAPI MDI-CAN is a microprocessor based system that allows high precision,
reliability and adaptability in the measurement of the battery's state of charge,
and in the calculation of the hours worked.
- The ZAPI MDI-CAN indicator has three internal functions:
- Indication of the battery's state of charge
- Operating hour meter
- Indication of the system Alarms.
- As this unit is not connected directly to the battery, the ZAPI MDI-CAN does
not require the complex auxiliary wiring associated with traditional indicators.
The wiring is "point-to-point" (from the indicator directly to the chopper). In
this way, the wiring of the machine is simpler, with reduced costs and
installation time.
To Next Page
Loading...
Need help?
General