Zapi MDI-CAN User Manual

AEZZP0CB - MDI-CAN - User Manual Page - 9/13
2.3 Connector description
CNA connector: Molex Minifit
- CANBUS communication version
A1 +12V MDI CAN positive power supply
A2 GND MDI CAN negative power supply
A3 CANL Can Low signal.
A4 CANH Can High signal.
A5 CANT A 120 ohm CANBUS termination resistance is
connected between this pin and CANL. To connect this
pin to CNA#6 to insert the resistance.
A6 CANHT Internally short circuited to CANH. To connect this pin
to CNA#5 to insert the 120 ohm termination resistance.
- SERIAL communication version
A1 +12V MDI CAN positive power supply
A2 GND MDI CAN negative power supply
A3 NCLTXD Serial Transmission negative.
A4 PCLTXD Serial Transmission positive.
A5 PCLRXD Serial Reception positive.
A6 NCLRXD Serial Reception negative.

Zapi MDI-CAN Specifications

General

Brand	Zapi
Model	MDI-CAN
Category	Measuring Instruments
Language	English