Zapi SMART CONSOLE User Manual

AFGZP0BA - SMART CONSOLE - User Manual Page - 35/50
Display frozen
While carrying out some special function via CAN, the display shows a fixed
image. To inform the operator that the console is not stuck, the led blinks slowly.
As soon as the console returns to normal operation, the led will stand still as
usual.
See chapter 5 for more information
4.4.2 ON button
The main function of the ON button is to turn on and off the console when internal
batteries are used. Other important information to keep in mind:
- Once console has been turned on via ON button, it will not react to other
short keystrokes of that button. A software filter prevents undesired
shutdown. To power off, press ON button for some second
- ON button can be used to reset the Smart Console in case it is stuck or it
does not respond correctly to commands. Keep the button pressed and it will
turn off. This method does not work while powered by an external supply
source: see 5.6 for an alternative method.
- If console is supplied by pin CNX8, any pressure of the ON button will have
no effect
4.4.3 F1 F2 F3 keys
These keys have a use which depends on the menu currently shown.
If a menu permits operation of one F button, it will say explicitly which F button is
active and what is its function.
If one or more F buttons are not used, nothing will happen if pressed.
The following list shows the menu where F buttons are used:
- CAN CONSOLE
- AUTOSCAN
- TESTER
- ALARM
The simultaneous activation of F2 and F3 forces a software reset: see section
5.6.
4.5 USB
The bottom side of the console hosts a USB type A socket: only type A plugs are
compatible with this socket.
The console features a USB Embedded Host so only USB devices can be
connected and recognized by the internal microprocessor.
Moreover the Smart Console supports the “mass storage” device class only: USB
sticks and flash drives are the only type of device which can be attached to the
console.
If a different USB class device is connected, no damage will occur because the
current output of the socket is limited. Anyway the console will not recognize the
device and it will do nothing.

Zapi SMART CONSOLE Specifications

General

Brand	Zapi
Model	SMART CONSOLE
Category	Controller
Language	English