© 2006 ZIH Corp. All product names and numbers are Zebra
trademarks, and Zebra and the Zebra logo are registered
trademarks of ZIH Corp. All rights reserved.
33181L-001 Rev. A
10/23/2006
Printed on
chlorine-free
recycled paper.
Media Rewind Upgrade
Installation Instructions
Prepare for Installation
This kit includes the parts and documentation necessary to install the media rewind option kit
into the 105SL™ printers. Read these instructions thoroughly before attempting to install this
kit.
Parts List
Caution • A qualified service technician must perform this installation.
3 Item Qty Part Number Description
Ref 1
G33181
Kit, Rewind Upgrade 105SL
13
HW30393-006
Screw, 8-32 x 0.37, Socket Head Cap (Qty. of 25)
26
HW40193
Washer, Flat 0.406 x 0.172 x 0.048 (Qty. of 25)
32
49688
Bearing, Flanged (Part of 40038M)
41
32416
Platen Roller
51
32122
Media Take-Up Spindle
61
47062-2
Hook, Rewind (Part of 32122)
71
32347
Bracket, Platen Support
83
HW30392-004
Screw, 6-32 x 0.25, Socket Head Cap (Qty. of 50)
93
HW33810
C-Ring (Two are included as a spares.) (Qty. of 100)
10 1
G48383M
Assembly, Std. Rewind Plate
11 1
30334-7
Assembly, Bearing Housing (Part of 32122)
12 1
31336M
RTU/MTU Pulley Assembly
13 1
HW33811
E-Ring (Qty. of 25)
14 1
45189-2
Belt, Rewind Drive
15 1
HW33804
Washer, Flat 0.76 x 0.51 x 0.03 (Qty. of 25)
16 1
HW30115
Washer, Wave (Qty. of 25)
17
48018
Pulley, Rewind
18 1
G46609-4M
Assembly, Lower Take Label Sensor. (Black/Red Wires)
Assembly Upper Take Label Sensor. (Green/Yellow
Wires)
19 2
HW32334
Screw, 6-32 x 0.37(Included as spares.) (Qty. of 100)
N/S= Not Shown
Bold = Part available for purchase.
Italic = Part not available for purchase, listed and shown for reference only.
To Next Page
Need help?
General
Weight and Dimensions
