Zephyr Pisa ZPI-E30BG User Manual

14
Pisa Use, Care, and Installation Guide
PISA
UNDERCABINET
CORE
Installation Instructions
Preparing the Cabinet
1. Determine and mark center line on wall and cabinet bottom with a pencil.
2. If the cabinet bottom is recessed, wood blocking must be installed to ensure proper alignment of
the hood with the cabinet bottom. Wood blocking should be flush within cabinet bottom.
3. Follow the dimensions in FIG. B and cut-out the bottom of your cabinet to create an opening for
the hood to fit through. For frameless cabinet measure 1-15/16” from the front of cabinet door. For
framed cabinet measure 1-15/16” from front of cabinet bottom.
FIG. B
7”
7-3/4”
7”
*6-3/16”
*11-1/2”
10-1/8”
19-7/8”
C/L
1-15/16”
*Dimension used for rear ducting option
front edge
glass handle
FIG. C

Zephyr Pisa ZPI-E30BG Specifications

General

Color	stainless steel
Hood Type	under cabinet
Venting Type	convertible
Temperature Sensor	no
Number of Fan Speeds	3
CFM	500 cubic feet per minute
Filters	2
Sones	5.3 sones
Control Type	slide
Delay Start	no
Interior Light	yes
Remote Control	no
Voltage	120 volts

Weight and Dimensions

Depth	11 1/8 inches
Height	11 1/4 inches
Width	29 7/8 inches
Net Weight	33 pounds