Zephyr Pisa ZPI-E30BG User Manual

15
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Horizontal Ducting Conversion
These steps below convert 6” round vertical ducting to horizontal ducting. If you plan on having
vertical ducting, please skip these steps.
1. Remove aluminum mesh filter. From
inside the hood, disconnect blower plug
located toward the right side interior of
hood body.
2. Remove (6) screws from top of hood and
(6) screws from back of hood attaching
blower plate to hood body.
3. Remove blower and blower plate from
hood body and reposition blower to
hood body so blower collar protrudes
from back of hood body. Re-install
blower plate to hood body using the (12)
screws previously removed from step 2.
Re-connect blower plug.

Zephyr Pisa ZPI-E30BG Specifications

General

Color	stainless steel
Hood Type	under cabinet
Venting Type	convertible
Temperature Sensor	no
Number of Fan Speeds	3
CFM	500 cubic feet per minute
Filters	2
Sones	5.3 sones
Control Type	slide
Delay Start	no
Interior Light	yes
Remote Control	no
Voltage	120 volts

Weight and Dimensions

Depth	11 1/8 inches
Height	11 1/4 inches
Width	29 7/8 inches
Net Weight	33 pounds