Zephyr Pisa ZPI-E30BG User Manual

7
Pisa Use, Care, and Installation Guide
ZEPHYRONLINE.COM
List of Materials
Parts Not Supplied
Ducting, conduit and all installation tools
Cable locking connector (if required by local codes)
Recirculating kit
Parts Supplied
(3) Wire Nuts
(1) 6” round damper (pre-installed)
(1) hardware package
HARDWARE PACKAGE CONTENTS
(1) LumiLight LED, 6W (24” model)
(2) LumiLight LED, 6W (30” & 36” models)
ĬŚĭŮ
(2) #6 x 1”
(1) hood body with sliding glass
ĬŚĭŮ
(4) M3.5x10 (24” model)
(5) M3.5x10 (30” & 36” models)
(4) M4 x 16mm
(30” & 36” models)
(2) upper installation brackets
(2) lower installation brackets
(24” model only)
(2) M4 x 8
(4) 3/16 x 3/8”
(4) 3/16 x 40
(24” model only)
(24” model only)
(24” model only)

Zephyr Pisa ZPI-E30BG Specifications

General

Color	stainless steel
Hood Type	under cabinet
Venting Type	convertible
Temperature Sensor	no
Number of Fan Speeds	3
CFM	500 cubic feet per minute
Filters	2
Sones	5.3 sones
Control Type	slide
Delay Start	no
Interior Light	yes
Remote Control	no
Voltage	120 volts

Weight and Dimensions

Depth	11 1/8 inches
Height	11 1/4 inches
Width	29 7/8 inches
Net Weight	33 pounds