26
PRW24F02CPG, PRB24F01BPG Use, Care, and Installation Guide
FULL SIZE COOLER
SINGLE & DUAL ZONE
PRESRV™
Installation Instructions
Removing the Sliding Glass Shelves
The following instructions for removing the sliding glass shelves is only applicable for beverage
coolers.
1. Open the door completely
and unload any contents
within the beverage cooler.
Make sure the shelf is fully
pushed back.
2. Lift the shelf at a 45 degree
angle from either the left or
right side from its original
position.
3. Pull the shelf outward until
it is removed from the inner
compartment. You may
encounter some resistance
from the shelf guard rail.
To Next Page
Loading...
Need help?
General