25
Technical parameter
Projects Min. Standard Max. Remark
Operation Voltage
9.8V 11.1V 25.2V
Operation Current
360mA - 5400mA
Tilt Mechanical Range
- 360° - Unlimited Rotation
Roll Mechanical Range
-255° 330° +75°
Pan Mechanical Range
- 360° - Unlimited Rotation
Operation Temperature
-10℃ 25℃ 45℃
Battery Capacity
2600mAh
Three 18650 Li-Ion
Batteries
Battery Runtime
12h Lab Data 1
Charging Time
4h Lab Data 2
Weight
≈ 2470g Excluding Extension Arm
Quick Release Plate
Weight
≈ 130g
Excluding Lens Support
Tube
Battery Weight
≈ 140g
Tripod Weight
≈ 260g
Payload
600g 6500g
Camera backing base is
needed when mounting
camera-lens combos
with weights close to
minimum payload.
Bluetooth
Bluetooth 5.0
Camera Charging
Support camera charging at a level of 5V/1A
Product Model：CR107
Product Specifications
Lab Data 1: This data is collected at a specified temperature of 25 ℃ . Mounted with
Canon 5D4 + 24-70mm F2.8L lens, TransMount Follow Focus Controller, Zoom
Controller, SmartSling Handle and TransMount Image Transmission Transmitter, fully
charged 18650-2600mAh 3.6V 9.36Wh batteries, the stabilizer was properly balanced
and put on a flat surface. The stabilizer battery can last for 12 hours with low motor
torque.
Lab Data 2: This test is conducted with a 5V/2.4A rated power adapter at a specified
temperature of 25℃ . The actual charging time in this test is 4 hours. However, charging
time varies with environmental factors. In addition, the lower the temperature, the longer
the charging will take.
All the data in this guide is gathered from internal experiments of ZHIYUN laboratories.
Under different scenarios, data is different to some extent. Please refer to the actual use
of CRANE 3S.
To Next Page
Loading...
Need help?
General
