10
V. COMFORT ADJUSTMENTS
Before operating the scooter, you may find the need to make some adjustments to increase your
comfort, such as the seat height, armrest width, and tiller angle.
WARNING!
Remove the key from the key switch before adjustments. Never attempt to do adjustments while the
scooter is in motion
.
SEAT HEIGHT ADJUST
MENT
• Lift up on the seat lock lever and pull th
e seat off of the seat post.
• Remove the seat post adjustment pin.
• Choose the appropriate seat height and re-insert the seat post adjustment pin.
• Re-install the seat.
SEAT ROTATION (Figure 13.)
• Pull up on the seat lock lever.
• Rotate the seat to the desired position.
• Release the lock lever in place.
ARMREST WIDTH ADJUSTMENT (Figure 14.)
• Loosen the armrest adjustment knobs located beneath the
seat frame.
• Move the armrests to the desired position.
• Tighten the armrest adjustment knobs.
Figure 14
To Next Page
Loading...
Need help?
General
