17
VIII. CARE AND MAINTENANCE
DAILY CHECK
• With the power off, check the throttle control lever. Make sure it returns to the primary position when
you release it.
• Check the right/left lock-nuts on the low end of the tiller. Make sure it is fastened to the tiller. Make
sure the battery lock knob is engaged.
WEEKLY CHECK
• Check all electrical connectors. Make sure they are not loose or corroded.
• Check the body joint bolt. Make sure the bolt is tightened.
• Test the brakes operation. This test should be carried out on an even surface with at least three feet of
clearance around your scooter.
MONTHLY CHECK
• Check the anti-tip wheels. Make sure they do not touch the ground under normal operation.
• Check the drive wheels for wear. If tread is minimally visible then replace the tires.
• Keep your scooter clean and free of foreign material, such as hair, food, drink, dust and mud, etc.
YEARLY CHECK
• Take your scooter to an authorized Zipr Mobility provider for yearly maintenance. This helps ensure
that your scooter is functioning properly and helps prevent future complications.
STORAGE
Your scooter should be stored in a dry place, free from temperature extremes. Otherwise, the frame,
the connections, and the electronics may rust and incur damage. During storage, disconnect the
batteries from the scooter.
CLEANING
• Never use a hose on your scooter or place it in direct contact with water.
• Your scooter has an ABS plastic body shroud that allows it to be easily wiped clean with a damp cloth.
• Never use any chemicals to clean the seat, as they may cause the seat to become slippery or dry out
and crack. Clean with a damp cloth and dry the seat thoroughly.
To Next Page
Loading...
Need help?
General
