15
Switching on Your Router
1. Press and hold the Power Key to get started. Make
sure that the power indicator is on.
NOTE:
Do not put anything on top of the router. Do not lay two
routers on top of each other during usage.
2. Wait 1-2 minutes after turning the router on before you
use the service. The data network indicator should be
lit on.
NOTE:
• When the router is turned off, an incoming caller will
hear the following prompt: “The number you have
dialed is currently unavailable.”
• If the data network indicator is red blinking constantly,
try to move the router to another location. The router
takes 1-2 minutes to initialize, attach to the network,
and obtain an IP address.
To Next Page
Loading...
Need help?
General
